Content from the IMPEx group

calculateFieldline by SINP (5)

• Download

Workflow for Taverna based on the IMPEx-FP7 method calculateFieldLine. This method can be used to return the field lines (calculated by SINP PMM), which start in given points inside the planetary magnetosphere and in different time moments for each point, and the magnetic field along these lines.

Created: 2014-03-31 | Last updated: 2014-05-19

calculateDataPointValue by SINP (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method calculateDataPointValue. This method can be used to return the magnetic field (calculated by SINP PMM) in given points inside the planetary magnetosphere and in different time moments for each point.

Created: 2014-03-31 | Last updated: 2014-05-19

getMostRelevantRun by FMI (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getMostRelevantRun. This method is intended to help users to find those simulation runs in SMDB's tree.xml file whose input parameters best match the given solar wind conditions. For each simulation run in the tree.xml file the method computes a 'difference index'. This 'difference index' is a sum of individual difference indices (one for each solar wind parameter defined in the input parameter set).

Created: 2014-03-31 | Last updated: 2014-05-19

getFileUrl by LATMOS (5)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getFileURL. This method fetches precomputed data, i.e. already calculated values along a given spacecraft trajectory.

Created: 2014-03-31 | Last updated: 2014-05-19

getFieldline by LATMOS (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getFieldLine. This method computes field lines or stream lines inside the simulation box. The user will provide a set of 3D position coordinates which act as starting points for the field/stream line tracing. The tracing may be performed forwards, backwards or both. The method will return an URL to a VOTable file which contains the field/stream lines as a set of 3D position coordinates and the requested physical quantities at these points.

Created: 2014-03-31 | Last updated: 2014-05-20

getFieldline by FMI (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getFieldLine. This method computes field lines or stream lines inside the simulation box. The user will provide a set of 3D position coordinates which act as starting points for the field/stream line tracing. The tracing may be performed forwards, backwards or both. The method will return an URL to a VOTable file which contains the field/stream lines as a set of 3D position coordinates and the requested physical quantities at these points.

Created: 2014-03-31 | Last updated: 2014-05-19

getDataPointValue_Spacecraft by LATMOS (4)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getDataPointValue_Spacecraft. This method is used to compute values of various physical quantities (e.g. density, magnetic field strength etc.) along the path of a given spacecraft.

Created: 2014-03-31 | Last updated: 2014-05-19

getDataPointValue_Spacecraft by FMI (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getDataPointValue_Spacecraft. This method is used to compute values of various physical quantities (e.g. density, magnetic field strength etc.) along the path of a given spacecraft.

Created: 2014-03-31 | Last updated: 2014-05-20

getDataPointValue by LATMOS (5)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getDataPointValue. This is a generic method which can be used to return parameters for 0D, 1D, 2D, or 3D.

Created: 2014-03-31 | Last updated: 2014-05-19

getDataPointValue by FMI (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method getDataPointValue. This method is used to compute values of various physical quantitites (e.g. density, magnetic field strengths etc.) for a given simulation run at a user given set of 3D points.

Created: 2014-03-31 | Last updated: 2014-05-19

calculateCubeMercury by SINP (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method calculateCubeMercury. This method returns the magnetic field, calculated by SINP PMM, in grid points of a cube with chosen boundaries inside the Hermean magnetosphere with chosen sampling.

Created: 2014-03-31 | Last updated: 2014-05-19

calculateDataPointValueMercury by SINP (6)

• Download

Workflow for Taverna based on the IMPEx-FP7 method calculateDataPointValueMercury. This method can be used to return the magnetic field (calculated by SINP PMM) in given points inside the Hermean magnetosphere.

Created: 2014-03-28 | Last updated: 2014-05-19

Credits: Manuel Scherf

calculateDataPointValue by SINP (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method calculateDataPointValue. This method can be used to return the magnetic field (calculated by SINP PMM) in given points inside the planetary magnetosphere and in different time moments for each point.

Created: 2014-03-28 | Last updated: 2014-05-20

calculateCube by SINP (3)

• Download

Workflow for Taverna based on the IMPEx-FP7 method calculateCube. This calculates a 3DCube based on the paraboloid model of SINP around Earth (see http://smdc.sinp.msu.ru/index.py?nav=paraboloid/index).

Created: 2014-03-28 | Last updated: 2014-05-19

XPath From VOTable (1)

• Download

A XPath From text version for VOTables. This is useful to extract certain information from the header of the VOTables but it could work for any XPath.

Created: 2014-03-12

Credits: David PS Anja Le Blanc

Attributions: Extracting data from VOTable format by using XPath query

Plane cut on planetary models provided und... (1)

• Download

This is a simple workflow using one of the webservice provided by IMPEx. It calculates the value of a plane for different variables for a particular planetary model.

Created: 2013-09-11

Credits: David PS

Get Particle trajectories from starting po... (1)

• Download

This is a workflow that uses 2 different services from IMPEx to calculate different variables at a certain radius for a particular planetary model.

Created: 2013-09-10

Credits: David PS

Attributions: Sphere lan-lot random points Particle trajectories in the planetary models provided under IMPEx VOTable on the net maker for IMPEx Interpolate n-randon points in a sphere on a planetary models provided under IMPEx

Interpolate n-randon points in a sphere on... (1)

• Download

This is a workflow that uses 2 different services from IMPEx to calculate different variables at a certain radius for a particular planetary model.

Created: 2013-09-10

Credits: David PS

Attributions: Interpolate values on planetary models provided under IMPEx VOTable on the net maker for IMPEx Sphere lan-lot random points

Vector field lines in the planetary models... (1)

• Download

This is a simple workflow using one of the webservice provided by IMPEx. It calculates the field lines for the vector field requested for the starting points provided for a particular planetary model.

Created: 2013-09-10

Credits: David PS

Particle trajectories in the planetary mod... (1)

• Download

This is a simple workflow using one of the webservice provided by IMPEx. It calculates the particle trajectories for the defined particle (initial position, velocity, mass and charge) for a particular planetary model.

Created: 2013-09-10

Credits: David PS

Interpolate values on planetary models pro... (2)

• Download

This is a simple workflow using one of the webservice provided by IMPEx. It calculates the value of different variables, at the cordinates that a spacecraft pass through for the time range provided, for a particular planetary model. The orbital values of the spacecraft are obtained by AMDA.

Created: 2013-09-10 | Last updated: 2013-09-10

Credits: David PS

Interpolate values on planetary models pro... (1)

• Download

This is a simple workflow using one of the webservice provided by IMPEx. It calculates the value of different variables, at the cordinates provided, for a particular planetary model.

Created: 2013-09-10

Credits: David PS

VOTable on the net maker for IMPEx (1)

• Download

This simple workflow is a way to create a simple votable that uses the standards from IMPEx and provides an URL for the created VOTable enabling re-use of it through the IMPEx services

Created: 2013-09-10

Credits: David PS