Workflows

de Bruin et al. Workflow 1 (1)

• Download

This is "Workflow 1" from de Bruin et al., Mol. Cell. Proteomics 2012.

Created: 2012-08-01 | Last updated: 2012-08-01

Credits: Magnus Palmblad

Plasma Precipitation Analysis (1)

• Download

ABOUT THE WORKFLOW This workflow was used to analyze the data in a manuscript by Mostovenko et al. (2012, submitted), comparing proteins in the precipitate with those left in solution after organic solvent precipitation. However, the workflow is generally applicable in comparisons of any binary fractionation method in proteomics, where the fractions are analyzed by liquid chromatography-tandem mass spectrometry. The workflow identifies proteins by SpectraST spectral library search and X!Ta...

Created: 2012-07-31 | Last updated: 2012-07-31

Credits: Magnus Palmblad Kate Mostovenko Yassene

Find Duplicates using Matchbox command lin... (1)

• Download

The workflow takes a list of digital documents as input, extracts SIFT features using image processing algorithms, creates dictionary of visual words, generates BoW (Bag of Words) histogramms and finds duplicates. The count of parallel threads can be passed as a parameter. Finally search results are stored in a text file that contains a list of possible duplicates with associated similarity score. This score values are spread between 0 (low similarity) and 1 (high similarity). Image compariso...

Created: 2012-07-31 | Last updated: 2012-07-31

Credits: Roman

Genome variant to Protein change (1)

• Download

Reports protein change, given a genomic variant, using mutalyzer

Created: 2012-07-27 | Last updated: 2012-10-29

Credits: Helen Hulme

Extract SDSS field information and PSF (5)

• Download

This workflow gathers information needed by the execution of Sextractor, Galfit and Ellipse, from the SDSS VO service. It receives two inputs: 1) An ascii table with information about the image such as data of the field, name of the fits file or if it is barred or not. 2) A configuration file with the paths where the files needed by the workflow can be found and other paths where to store the files generated by the workflow This workflow extracts the band from the image header, and the info...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Susana

Check the content of the Registry for mism... (1)

• Download

This workflow check for tables which are registered in the HELIO registry but not available in the HFC and for tables which are in the UOC but which are not registred.

Created: 2012-07-26

Credits: Anja Le Blanc

Adjusting galaxy parameters using galfit (4)

• Download

This workflow creates galfit configuration files using data from a votable, it runs galfit, its results is added to the votable, it creates new config files for galfit using the previous results, it runs galfit a second time considering galaxies that have and do not have bars in order to adjust the objective parameters and it finally includes the results into the votable. It requires the specification of the columns that contain file names (these files should be accesibles from taverna). If t...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Attributions: Create configuration files from a template and a votable Run galfit using a votable Create votable from galfit results Create votable from different galfit paramenter adjustments Create galfit configuration files with partition criteria using votable

Create galfit configuration files with par... (1)

• Download

This workflow creates galfit configuration files using a partition criteria. The resulting configuration files are different depending on whether the galaxy has o doesn't have a bar. They are created (one for every row in the votable) using a template whose keys are replaced by data from a votable. Keys must appear also in the vocabulary file and match column names in the votable. A column in the votable must contain the name of the result configuration file. This workflow uses astrotaverna ...

Created: 2012-07-26 | Last updated: 2012-07-26

Credits: Julian Garrido

Create votable from galfit results (4)

• Download

The workflow creates a votable from the results provided by galfit. It returns this table and an aditional table that is joined to the input table. It requires a votable that contains a column with the file name resulting from running galfit and such files must be accesible from taverna. It uses astrotaverna plugin (http://wf4ever.github.com/astrotaverna/) and it has a dependency on stil library (http://www.star.bris.ac.uk/~mbt/stil/).

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Run galfit using a votable (2)

• Download

It runs galfit and adjust the paramenters specified. This workflow has a dependency on the stil library (http://www.star.bris.ac.uk/~mbt/stil/). Galfit is called by a bash script as 'galfit'. Galfit is called for every row in the votable. Columns where the result file name and the configuration file name are defined must be especified. These files should be accesibles from taverna. ExperimentFolder provides the root folder for the experiment. If the configuration files contain references to o...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Ajusting galaxy paramenters using sextractor (5)

• Download

This workflow creates configuration files for sextractor, it runs sextractor using this configuration files, it adds sextractor results to the input votable and adds new calculated columns. This task requires a votable as input, a template, a vocabulary and the specification of the column names that contain some required files (configuration files, image files, ...). These files must be accesible from taverna. Sextractor is called by an bash script as 'sex'. Every row in the votable cotains ...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

Attributions: Create configuration files from a template and a votable Run sextractor using a votable Create votable from sextractor results Add columns to a votable resulting from executing sextractor.

Create votable from sextractor results (2)

• Download

The workflow creates a votable from the results provided by sextractor (votables). It returns this table and an aditional table that is joined to the input table. It requires a votable that contains a column with the file name resulting from running sextractor and such files accesible from taverna. It uses astrotaverna plugin (http://wf4ever.github.com/astrotaverna/).

Created: 2012-07-26 | Last updated: 2012-08-21

Credits: Julian Garrido

Run sextractor using a votable (2)

• Download

It runs sextractor and adjust the paramenters specified. This workflow has a dependency on the stil library (http://www.star.bris.ac.uk/~mbt/stil/). Sextractor is called by an bash script as 'sex'. Sextractor is called for every row in the votable. Columns where the configuration file and the image file name are defined must be especified. These files should be accesibles from taverna. ExperimentFolder provides the root folder for the experiment. If the configuration files contain refer...

Created: 2012-07-26 | Last updated: 2012-09-07

Credits: Julian Garrido

13C NMR spectra prediction (2)

• Download

This workflow can be used to predict the 13C NMR spectra of a molecule. The generation of the structure of the molecule is done using the IUPAC to Structure node that uses OPSIN to convert the name of the molecule to a structure. Alternativelly, one can read the structure from a file. The spectra prediction is based on the NMRShiftDB implementation and the data used is also from NMRShiftDB. The atom topological environments were represented as Atom Signatures and used to calculate the checmia...

Created: 2012-07-26 | Last updated: 2012-08-10

Credits: Ldpf

Create configuration files from a template... (1)

• Download

This workflow uses astrotaverna artifacts. It creates files by using a template whose keys are replaced by data from a votable. A configuration file is created for every row in the votable. The keys must appear also in the vocabulary file and match column names in the votable. A column in the votable must contain the name of the result configuration file.

Created: 2012-07-26 | Last updated: 2012-09-04

Credits: Julian Garrido

Check the content of the Registry for mism... (1)

• Download

This workflow check for tables which are registered in the HELIO registry but not available in the UOC and for tables which are in the UOC but which are not registred.

Created: 2012-07-25

Credits: Anja Le Blanc

Check registry for wrongly registed and un... (2)

• Download

HELIO registry contains a list of tables available in the HEC. The HEC contains a table with available talbes itself. This workflow shows the differences between these two lists.

Created: 2012-07-24 | Last updated: 2012-07-24

Credits: Anja Le Blanc

RTTS Mapper (1)

• Download

Generates RTTS counts file from SAM file. Output consists of three columns: counts at given position;chromosome;position(0 based). Workflow removes untemplated nucleotides from 5' ends of the reads. Authors: Jeppe Vinther, Lukasz Kielpinski Workflow published by lukaszkielpinski on Galaxy Jun 26, 2012 imported to myExperiment Jul 17, 2012 during demonstration of Galaxy-myExperiment integration (specifically generating SVG and showing steps of more complex workflow).

Created: 2012-07-17 | Last updated: 2012-07-17

Transform 'Stitch Gene blocks' FASTA block... (1)

• Download

Converts FASTA blocks to a FASTA file. Workflow published by galaxyproject on Galaxy Jun 27, 2012 imported to myExperiment Jul16, 2012 during demonstration of Galaxy-myExperiment integration  https://main.g2.bx.psu.edu/u/galaxyproject/w/transform-stitch-gene-blocks-fasta-blocks-to-standardized-fasta-file

Created: 2012-07-16 | Last updated: 2012-07-16

Basic Illumina Reads Quality (Functional G... (1)

• Download

From the RNA-Seq analysis tutorial during the Functional Genomics Workshop 2012 https://caps.osu.edu/pfg-workshop Workflow published by mejia-guerra on Galaxy Jun 22, 2012 imported to myExperiment Jul16, 2012 during demonstration of Galaxy-myExperiment integration

Created: 2012-07-16 | Last updated: 2012-07-16

Basic RNA-Seq Analysis - Differential Expr... (1)

• Download

From the RNA-Seq analysis tutorial during the Functional Genomics Workshop 2012 https://caps.osu.edu/pfg-workshop Workflow published by mejia-guerra on Galaxy Jun 22, 2012 imported to myExperiment Jul16, 2012 during demonstration of Galaxy-myExperiment integration  

Created: 2012-07-16 | Last updated: 2012-07-16

AnnotationTimes (1)

• Download

This very simple workflow was used in the analysis of the metadata produced by the human annotation phase of the SALAMI (Strucural Analysis of Large Amounts of Music Inforamtion) project.  The input data is the metadata available from http://ddmal.music.mcgill.ca/salami/annotations It produces a histogram of song durations and scatterplot of combined annotation time verus song duration. The fields are   SONG_ID                   Un...

Created: 2012-07-16 | Last updated: 2012-07-16

Example of how to use Sesame service and V... (1)

• Download

This workflow needs as input a list of names of galaxies. Then it queries Sesame services to get the coordinates of this galaxies, and finally with this coordinates queries a Virtual Observatory Services (a cone service).

Created: 2012-07-14

Gene to Pathways (Vistrails) (1)

• Download

This is a Vistrails workflow that returns the pathways of a given gene ID. In doing so, it uses two kegg services.

Created: 2012-07-10

Credits: Khalid Belhajjame

Gene to Pathways (1)

• Download

This is a Taverna workflow that given a gene ID fetches the corespondondings pathways. To do so, the workflow make use of two KEGG web services.

Created: 2012-07-09 | Last updated: 2012-07-10

Credits: Khalid Belhajjame